??? Risk Parameters

Each asset in the Evolution Finance protocol has specific values related to their risk, which influences how they are loaned and borrowed. The table below shows a summary of the latest values.

Name	Symbol	Collateral	Loan To Value	Liquidation Threshold	Liquidation Bonus	Reserve Factor
Stablecoins
Binance USD	BUSD	no	-	-	-	10%
DAI	DAI	yes	75%	80%	5%	10%
Gemini Dollars	GUSD	no				0%
Synthetix USD	SUSD	no	-	-	-	20%
True USD	TUSD	yes	75%	80%	5%	10%
USDC	USDC	yes	80%	85%	5%	10%
Tether	USDT	no	-	-	-	10%
Other Assets
Aave	AAVE	yes	50%	65%	10%	0%
Basic Attention Token	BAT	yes	70%	75%	10%	20%
Balancer	BAL	yes	55%	65%	10%	20%
Curve DAO	CRV	yes	40%	55%	15%	0%
Enjin	ENJ	yes	55%	60%	10%	20%
Ethereum	ETH	yes	80%	82.5%	5%	10%
Kyber Network	KNC	yes	60%	65%	10%	20%
Chainlink	LINK	yes	70%	75%	10%	20%
Decentraland	MANA	yes	60%	65%	10%	35%
Maker	MKR	yes	60%	65%	10%	20%
Republic Protocol	REN	yes	55%	60%	10%	20%
Synthetix	SNX	yes	15%	40%	10%	35%
Uniswap	UNI	yes	60%	65%	10%	20%
Wrapped BTC	WBTC	yes	70%	75%	10%	20%
Wrapped ETH	WETH	yes	80%	82.5%	5%	10%
Sushi Bar	XSUSHI	yes	25%	45%	15%	35%
Yearn YFI	YFI	yes	40%	55%	15%	20%
0x	ZRX	yes	60%	65%	10%	20%

The table above results from the asset risk assessment relating to security, governance and the markets. Tokens with security concerns around their smart contract cannot be considered for integration since these risks are impossible to control. Similarly, tokens which risk exposure to single counter-parties cannot be used as collateral.

To retrieve the relevant values directly from the smart contracts, see this section of the developer docs.

Risk Parameters Change

When market conditions change, risks change, and so we are continuously monitoring the assets integrated into the protocol which sometimes requires to quickly adapt the risk parameters. The table below tacks parameters changes which are in bold.

Risk Parameters Analysis

The risk parameters allow to mitigate market risks of the currencies supported by the protocol. Each loan is guaranteed by a collateral that may be subject to volatility. Sufficient margin and incentives are needed for the loan to remain collateralised in adverse market conditions. If the value of the collateral falls bellow a threshold, part of it is auctioned to repay part of the loan and keep the ongoing loan collateralised.

Collaterals

USDT, BUSD and sUSD are strongly exposed to the risk of single point of failure in their governance. Their counter-party risk is too high both in terms of centralisation and trust. For this reason, we cannot consider them to be warrant of the solvency of the protocol. USDT, BUSD and sUSD cannot be used as collateral.

Overall, stablecoins are mostly used for borrowing, while volatile assets which users are long on are mostly used as collateral. Hence, the users of the protocol still gain great benefits from the addition of these stablecoins. Their risks are mitigated by the fact they cannot be used as collateral.

Market risks can be mitigated through Aave’s risk parameters which define collateralisation and liquidation rules. These parameters are calibrated per currency to account for the specific risks identified as shown in Figure 2.

Loan to Value

The Loan to Value (LTV) ratio defines the maximum amount of currency that can be borrowed with a specific collateral. It’s expressed in percentage: at LTV=75%, for every 1 ETH worth of collateral, borrowers will be able to borrow 0.75 ETH worth of the corresponding currency. Once a loan is taken, the LTV evolves with market conditions.

For each wallet the maximum LTV is calculate as the weighted average of the LTVs of the collateral assets and their value:

$Max LTV = \frac{ \sum{Collateral_i \: in \: ETH \: \times \: LTV_i}}{Total \: Collateral \: in \: ETH \:}$

Liquidation Threshold

The liquidation threshold is the percentage at which a loan is defined as undercollateralised. For example, a Liquidation threshold of 80% means that if the value rises above 80% of the collateral, the loan is undercollateralised and could be liquidated.

The delta between the Loan-To-Value and the Liquidation Threshold is a safety cushion for borrowers.

For each wallet the Liquidation Threshold is calculate as the weighted average of the Liquidation Thresholds of the collateral assets and their value:

$Liquidation \: Threshold= \frac{ \sum{Collateral_i \: in \: ETH \: \times \: Liquidation \: Threshold_i}}{Total \: Collateral \: in \: ETH \:}$

Liquidation Bonus

Bonus on the price of assets of the collateral when liquidators purchase it as part of the liquidation of a loan that has passed the liquidation threshold.

Health Factor

For each wallet, these risks parameters enable the calculation of the health factor:

$H_f = \frac{ \sum{Collateral_i \: in \: ETH \: \times \: Liquidation \: Threshold_i}}{Total \: Borrows \: in \: ETH \: + \: Total \: Fees \: in \: ETH}$

When $H_f < 1$ the loan is undercollaterised, it may be liquidated to maintain solvency as described in the diagram below.

Reserve Factor

The reserve factor allocates a share of the protocol's interests to a collector contract as reserve for the ecosystem. This reserve is new to V2, used to sustain the DAO and pay protocol contributors. It is made out of various assets including AAVE.

Aave's solvency risk is covered by the Safety Module, with the incentives coming from the ecosystem reserve. As such, the Reserve Factor is also a risk premium and so it is calibrated based on the overall risk of the asset. Stablecoins are the less risky assets with lower reserve factor while volatile assets hold more risk with a higher factor.

The collector contract can be found at 0x464c71f6c2f760dda6093dcb91c24c39e5d6e18c.

From Risks to Risk Parameters

Market risks have the most direct impact on the risk parameters:

Liquidity

The liquidity is based on the volume on the markets, which is key for the liquidation process. This can be mitigated through the liquidation parameters: the lower the liquidity, the higher the incentives.

Volatility

The volatility of price can negatively affect the collateral which safeguards the solvency of the protocol and must cover the loan liabilities. The risk of the collateral falling below the loan amounts can be mitigated through the level of coverage required, the Loan-To-Value. It also affects the liquidation process as the margin for liquidators needs to allow for profit.

The less volatile currencies are the stablecoins followed by ETH, they have the highest LTV at 75%, and the highest liquidation threshold at 80%.

The most volatile currencies REP and LEND have the lowest LTV at 35% and 40%. The liquidations thresholds are set at 65% to protect our users from a sharp drop in price which could lead to undercollaterisation followed by liquidation.

Market Capitalisation

The market capitalisation represents the size of the market, which is important when it comes to liquidating collateral. This can be mitigated through the liquidation parameters: the smaller the market cap, the higher the incentives.

Overall Risk

The overall risk rating is used to calibrate the Reserve Factor with factors ranging from 10% for the less risky assets to 35% for the riskiest.